Transparente Kristall-LED-Streifenverbinder – 10 mm 4-polige lötfreie Clips | Streifen zu Kabel / Streifen zu Streifen / Buchsenstecker – Großhandel, Mindestbestellmenge 500 Stück | Direkt ab Werk


Typ: Streifen mit Draht
Packmaß: Mindestbestellmenge 500 Stück
Preis:
Sonderpreis$345.00 USD ($0.69 / zählen)

Beschreibung

Transparente Kristall-LED-Streifenverbinder – 10 mm 4-polige lötfreie Clips | Streifen zu Kabel / Streifen zu Streifen / Buchsenstecker – Großhandel, Mindestbestellmenge 500 Stück | Direkt ab Werk

Lieferinhalt

Typ Lieferinhalt
Streifen mit Draht 500 × Stecker, 1 × Benutzerhandbuch
Streifen zu Streifen mit Draht 500 × Stecker, 1 × Benutzerhandbuch
Streifen zu Streifen 500 × Stecker, 1 × Benutzerhandbuch
Von der Abisolierung zum Draht 500 × Stecker, 1 × Benutzerhandbuch
L-Verbinder 500 × Stecker, 1 × Benutzerhandbuch
Streifen auf Buchsenstecker 500 × Stecker, 1 × Benutzerhandbuch

Über diesen Artikel

  • Das verbesserte transparente Kristallgehäuse sorgt für ein sauberes Aussehen und volle Lichtdurchlässigkeit ohne dunkle Flecken.
  • Werkzeuglose Einrichtung: Laschen öffnen, Polarität ausrichten (+/−), Streifen in die Nut einlegen, Laschen schließen – fertig zum Einsatz.
  • Lötfreier, zuverlässiger Kontakt: Kupferclips sorgen für eine stabile, langlebige Verbindung ohne Aussetzer.
  • Ultraschlankes (~5 mm) Profil passt in die meisten Aluminiumkanäle; kompatible Varianten unterstützen 2-polige 8-mm-Einzelfarbenstreifen (COB/SMD 3528/2835) und 4-polige 10-mm-RGB-Streifen.
  • Kundensupport mit 1-jähriger Qualitätsgarantie – kontaktieren Sie uns jederzeit für schnelle Hilfe.

Bestellung & Logistik

  • Lieferzeit: Versand innerhalb von 2–5 Werktagen
  • Verpackung: Karton
  • Versand aus dem Hauptlager in China.
  • Standardversand: 7–25 Tage
  • Expressversand (DHL/UPS/FedEx): 3–10 Tage
  • Kostenloser Versand: Bestellungen über 399 $ qualifizieren sich für kostenlosen Standardversand.

Nutzungshinweise / Installationstipps

  • LED-Streifen entlang der markierten Schnittlinien zuschneiden, auf saubere, gerade Kanten achten.
  • Achten Sie auf die richtige Polarität und setzen Sie die Kupferpads vollständig unter die Anschlussstifte, bevor Sie den Clip schließen.
  • Für einen festeren Halt drücken Sie den Clip nach dem Schließen leicht mit einer Zange nach.
  • Nicht wasserdicht; für den Außenbereich oder feuchte Bereiche mit Schrumpfschlauch oder Silikon abdichten.

Anwendungen

  • DIY-LED-Streifenprojekte und Umgebungsbeleuchtung
  • Einzelhandelsdisplays, Ausstellungen und Beschilderungen
  • LED-Installationen für Wohn- und Geschäftsgebäude

Das könnte Ihnen auch gefallen

Customer Reviews

Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
T
The H.E.A.T.

Connectors look great!

F
FF

Easy to use and simple installation. Trim broken LED strips at the indicated splicing location and insert ends into clips.

I snagged my Govee LED light strips while moving things around and thought I had just wasted a good set and they would end up in the trash. They are deemed un-trimmable and can not be shortened or spliced. Well I am glad that it was wrong. I cut the ends off from the broken section as seen in the first photo and inserted them into the clip. In the second photo you can clearly see lights are on both sides of the clip. I double checked the strips functionality and ran it through different lighting sequences and found that there were no issues. Lights functioned as normal and I saw no difference from before the break.

Absolutely saved my LED strips.

Highly recommend. I will always keep some handy

S
Scott A.

I have several strings of LED strip lights cut to size. In one application for ambient lighting I always felt the accent light was not bright enough. My options were to just replace the whole setup or add more lights to the strip. These connectors allow me to easily just add a duplicate strip, doubling the number of LEDs and now producing the brightness I wanted.

M
Matty Smith

We ended up going with brighter strip lights, but these connectors made it easy to add on additional lights. You just make sure the ends are lined up and use a pair of pliers to clamp them together. It��s a pretty straightforward and simple task.

D
Don R.

I have a few strips that are just not long enough. These clips allow me to cut exactly what I need to fit without having to solder, which my big hands are not very good at with these small wires.
I did have one clip that kept coming unlocked, but I replaced it with another and it worked fine.

Reviews in Other Languages

Zuletzt angesehen