DMX Module

DMX module adopts the advanced micro control unit, it receives widespread international way that transformed the DMX-512 standard digital control signals into PWM controller signals for driving LED; You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures.

Technical Parameters

Working temperature: -20-60 ℃
Supply voltage: DC12V
Output: 3 channels
Grayscale: 256
The number of occupied channel: 3
Connecting mode: common anode
External dimension: L72ΧW38ΧH26 mm
Packing size: L105ΧW65ΧH40 mm
Static power consumption: <1W
Output current: <2A(each channel)
Output power: 12V:<72W

External Dimension

Interface Specifications

         Power input interface:

Adopt two sheath wires as connecting wires,meanwhile,Red wire→ +12V  Black wire→ GND

 DMX signal interface:

Adopt three sheath wires as connecting wires,meanwhile,Blue wire→ DATA-  Red wire→ DATA+  Black wire→ GND

           Load output interface:

Adopt four sheath wires as connecting wires,meanwhile,White wire→ +  Red wire→ R    Green wire→ G  Blue wire→ B

Direction for use

      1. To connect signal wire at first, and then load wire, the last power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;

      2. In the absence of receiving DMX signal, the module will achieve a multicolor gradual changing (built-in function);

      3. Receiving DMX signal, the built-in function is not available,it will be controlled by computer console control;

      4. You could set the address code of module ( from 1 to 1022) through the DMX editor of our company.

Typical Applications