The 5050 strip in RGB color, with the same LED gives different colors. I want to have strips with multicolor bulb on it. IS there strips models like that? Just like some of the Christmas light strings.
Beside the 5050 RGB color LED flexible strip, with 3 in 1 RGB color LED on, the RGB color strip in another form is made the strip with 3differet color LED, 1 RED, 1 Blue and 1 Green. It just likes the holiday themed light string with multicolored bulbs on. For this kind of RGB strip, by working with the relative LED controller can give different combinations of the Red, Green and Blue color.
Are these Infrared lights that you cannot see with human eyes, or are they
LED’s that light up?
The Infrared (IR) light is electromagnetic radiation with longer wavelengths than those of visible light, which is not visible as they are in extending from the nominal red edge of the visible spectrum. The LED lights made with the Infrared LED cannot see with human eyes. The similar example we always meet in our daily life like the security camera, the Infrared LED are used in this device.
The MADRIX® brand brings powerful yet easy-to-use
LED lighting control solutions based on innovative software and hardware to the lighting market.
MADRIX is the LED lighting controller. It is a feature-rich and intuitive Windows® software.
The application is both an effect generator and media server with outstanding capabilities to display unique real-time effects. Endless stunning visuals can be created using pixel mapping and the built-in graphics and render engine.
MADRIX can be used alone, or along with any DMX/MIDI console or desk.
Complementary MADRIX hardware reliably controls your LED installation via MADRIX–the centerpiece of our intuitive products. This provides a seamless integration of both software and hardware and high performance.
I have a case that need to use 3 LED strips nearly but in 3 different places in a same space. For limitation, between the 3lights, no wire can be used. And the 3pcs strip have to be able to work synchronously. SO I want to look for if there is wifi choice for my application.
Two choices are available.
Option #1 Use the 1Master wifi controller and 3Slave WiFi controller, and controlled by your Smart Mobile Phone with the software comes along with the wifi controller package.
For this solution, the Master controller cannot be used to run strips, so for 3strip, need to use 3Slave controller.
Option #2 Use 1Master WiFi controller and 2Slave WiFi controller, and controlled by the Remote comes with the Master WiFi controller.
For using this solution, as for the Master controller can use to load 1pcs strip, so only 2Slave controller.
The LED flashlight, some of them use the 18650 chargeable batteries, but there is a small model that uses the 14500 battery. For the charger, how can I use the 18650 charger provided to charge the 14500 battery?
A simple way is to use the fake battery, which also can be named as the extension contact. PLS find below the explanation about how to use the fake battery to reach the target.
No, the amount of wattage consume does not determine the output of light. All LED’s are built differently with different diodes, boards, extrusions and chips. So you can never base what one bulb consumes to what one produces. LED’s are built to cut down electrical consumption and give you the brightest light possible.
Conventional incandescent lamps are made to operate on standard AC power. Descrete LED chips themselves are designed to operate on DC current typically in the 350 mA range. As a result LED bulbs are designed with built in AC to DC converters that supply the correct current needed for the specific LED chips. LED lights may be used in place of traditional incandescent lamps without changing the fixture. Please note that most LED lights are not designed to be used with dimmers. Do not install an LED bulb into a dimmer controlled circuit with a properly designed LED lamp. Flourescent Tube lamps operate with a specific ballast. To install a T8 LED tube replacement, the flourscent ballast fixture must be removed or bypassed to provide the standard direct connection of the 110 VAC power to the T8 LED tube. One end of the tube receives the positive and one end receives the nuetral.
The human eye is constructed for viewing our world in the broad spectrum of natural sunlight. LED light transmits 90% of the sun’s spectrum, and is far closer to natural light than fluorescent, incandescent or induction lighting. LED light allows people to see the true color of objects and their surroundings, making it an ideal choice to display products in the best possible light – literally.
Non-dimmable LED lamps and LED lamps with the double-click function must not be used with dimmers. The LED lamp and/or the dimmer may break. In the worst case this may even cause a fire hazard – even if the dimmer is set to maximum brightness. As rule therefore please use only dimmable LED lamps in combination with a dimmer.
The compact fluorescent is basically the same as a fluorescent tube. It reaches its maximum brightness in 1-2 minutes after turning on. Fluorescent lamps and compact fluorescents are designed for persistent use. Too many switching on and off can cut down the already short lifespan of a few thousand hours. LED differs from compact fluorescents in two main areas: it uses about 50 % less energy and constant switching does not affect its lifespan.
Electronic transformers do not work with LED lights. When replacing your transformer / power supply with a new one, we strongly recommend you purchasing a dedicatedLED power supply / transformer. The right kind of transformer is an investment to guarantee the maximum lifespan of the LED lights. This would need to be a constant voltage LED power supply / transformer.Unlike electronic transformers, commonly used for halogen lights these do not have minimum load requirements, but do have a maximum so make sure the sum of Wattage used by your LED lamps or lights is less than the maximum rating of the LED power supply / transformer. To maximize the efficiency and lifespan of your LED transformer keep the total power consumption close to 80%.
Please note: LED power supplies / transformers are design specifically for LED lights.
With Constant Voltage the LED module only requires a fixed voltage, often 12VDC or 24VDC. The current is usually regulated by either resistors that have been wired in series with the LEDs or by an onboard built-in regulator driver that the LED module may have. This arrangement is often used in signage where it is not known prior to the installation how many LED loads there will be and in linear architectural designs where there are a number of LED modules connected together. Constant voltage loads may be added in parallel across the output of the driver until the maximum output current is reached.
With Constant Current the reverse is true, the current is fixed by the driver while the voltage will vary depending on the load. The more LEDs are attached, the higher the output voltage will be, up to a maximum set by the driver. This is usually used when the load/number of LED’s is known and you want optimal efficiency, as in a recessed downlight or track fixture.
What I am looking for is a 2 LED kit, 1 red 1 white. That I can go from strobe to fixed white or fixed red. How can reach that effect?
We can use:
1x white LED light
1x red LED light
1x 24key IR RGB controller
The LED light, you can use 12V LED flexible strip in White and Red color, or other 12V LED lamp. There is a lot of the strip choices, in below link, we can find one suitable.
The 24key IR RGB controller is like below.
Connection of the kit
Note: The RGB controller has 4channels, one for + poles; the other 3 are all – poles. You can use any two of the – poles. And the kit suggest here is 12VDC operating, it need c to run.
Now after you connect the LED and controller like this, then you can use the remote to reach the effect you want.
We measure electricity by it by its effects on applications. An Amp (amphere), represents the amount of current in a circuit. Voltage, scientifically is the circuit’s “potential difference,” and this can be seen as the amount of “pressure” that drives electricity in circuits. Watts measure the use of electrical power, and 1 Watt is equal to 1 Volt, multiplied by 1 Amp. To understand this better let’s think if it like this… One commonly used analogy is that of the garden hose. The water pressure in the hose represents the voltage, and the amp value represents the volume of water flowing through the hose. The wattage, then, is the total amount of water that comes out of the hose, per unit of time.
So, using this analogy and think in terms of an electrical wire, it is simple to see how they relate. In an electrical circuit, the voltage may be 240v (as it is in most electrical outlets in the United Kindgom), and most appliances are set to run on this particular voltage, although each individual item will operate at different Amp levels, and therefore at a different Wattage.
Most LED light bulbs only use a fraction of the Watts of traditional incandescent or halogen bulbs. This is because most of the energy used by traditional bulbs is emitted as heat, with a small amount of light. With LEDs, there is little to no heat created, so all energy that is used to power them, goes into creating light.
The adhesive tape attached to the Flexible LED Strip is 200dmp in adhesiveness, and it’s not water resistant.
If need tape to withstand water, the 3M brand tape, model # 3M 9626 and 3M VHB could take into account.
Total leds multiply by lumen of each led, then to multiply by 0.8 which is the lighting effect for the milky white cover, and to multiply by 0.9 which is lighting effect for transparent cover. For example,T81.2 milky white cover,276pcs leds. Each leds is 6-7Lumen:276*6.5*0.8=1435.2.
Remarks: luminous flux=qty of leds*Luminous*transmittance. The qty of the led is consult, and the luminous is affected by drive current, CRI and color temperature. The small driver current,. The luminous is small. High CIR, then small luminous. The high color Temperature, then big luminous. Light transmittance is also changing. There are several kinds of material for the cover, like PC, PMMA, plastic, etc. The light transmittance of the plastic can reach to 97%,and the light transmittance for the PMMA can reach to 93%, the light transmittance for the PC can reach to 90%,which means the light transmittance through transparent or translucent body with its the percentage of the incident light flux. Milky white cover with lower light transmittance. That is to say light transmittance=the material of the light transmittance*(1-dimness).
The RGB flexible strip family
#1 5050, tri-chip LED flex strip
#2 Side Emitting RGB LED flexible strip, the light is projecting from the side.
#3 RGBW/RGBWW/RGBNW LED strips
As the RGB color strip can mix to get high color temperature white color and not so pure, so a new RGB color changing strip with extra pure white color is available.
You can select to get RGB+WARM WHITE (3000K-3500K), RGB+Natural White (4000K-4500K) and RGB+Pure White (6000K-6500K)
Above is a 9LED LED G4 bulb with 6pcs Warm White and 3pcs Red LED. No need for big double bulb fixtures and 3-way switches. This is all accomplished using a digital latching technique within the bulb’s microprocessor electronics. The bulb senses each toggle of the switch and latches into the Warm White mode if the switch is toggled off-on within 3 seconds. To revert to Red mode is a simple off and back on with a 3 second delay.
It is your choice whether you want Red or Warm White, and the control is all done using your existing switches.
If you want other color mix, like, Blue/White, Red/White, this is also available.
There are dual color switchback LED car bulbs. The new switchback design makes it perfect for turn signal lights.