6 Key RGB RF Audio Controller

Technical parameters
● Working temperature: -20-60 ℃
● Supply voltage: DC5V, 12V, 18V, 24V (for orders specify voltage)
● Output: 3 channels
● Connectiing mode: common anode
● Transmission/Receiving frequency: 433Mhz
● External dimension: L130ΧW64ΧH24 mm
● Packing size: L145ΧW95ΧH50 mm
● Net weight: 185g
● Gross weight: 220g
● Static power consumption: <1W
● Output current: <4A(each channel)
● Output power: 5V:<60W,  12V:<144W,  24V:<288W

Interface Specifications
  Power input interface ( the first way ):
  Adopt conventional DC power Transposon as power input interface, and equip with plug-DC.

Power input interface ( the second way ):
 Adopt male and female connector with screw.

Signal input interface:

 Adopt 3.5 earphone tie-in insert Audio.

Direction for use
1.Connect the load wire at first, following by the power wire; Please ensure short circuit can not           occur between connecting wire before you turn on the power;
2.Adopt RF control,there are six buttons altogether, and every key-press function is as follows:

ON/OFF: any state to close load output;
MODE：is the style/color function key, could choose different color changes, 13 total;
Button “B+”: Brightness control of the output signal each press changing speed +1, 256 total.
Button “B-”: each press brightness changing -1
Button “S+”: each press changing speed +1, 100 total.
Button “S-”: each press changing speed -1.

Note: When the external microphone input and audio signal input at the same time, system will process the audio signal.

3. Standard changes funtion as the following form:

Typical Application
Application circuit 1:

Application circuit 2：