![LEDLIGHTSWORLD LTD [home link]](includes/templates/35blue_en/images/logo.png "LEDLIGHTSWORLD LTD [home link]"){kind=logo}
0 item(s) - $0.00
These LEDs are sold in 10pcs increments. If you enter a quantity of "1", you will get 10pcs LEDs. If you enter a quantity of "3", you will get 30pcs LEDs, and so on.
※ Absolute Maximum Ratings(Ta=
Parameter | Symbol | Rating | Unit |
Power Dissipation | Pd | 180 | mW |
Forward Current | IF | 60 | mA |
Peak Forward Current ＊1 | IFP | 180 | mA |
Reverse Voltage | VR | 5 | V |
Soldering Temperature | Tsol | 260 (for 5 seconds) | ℃ |
Operating Temperature | Topr | - | |
Storage Temperature | Tstg | - | |
Electrostatic discharge | ESD | 2000 | V |
＊1 IFP condition: pulse of 1/10 duty and 0.1ms width.
※ Electrical-optical characteristics(Ta=
Parameter | Symbol | Min. | Typ. | Max. | Unit | Condition |
Forward Voltage | Vf | 3.2 | ----- | 3.4 | V | IF=60mA |
Luminous Intensity | Iv | 780 | ----- | 1000 | mcd | |
Dominant Wavelength | lD | 465 | ----- | 470 | nm | |
Viewing Angle | 2θ1/2 | ----- | 120 | ----- | deg | |
Reverse Current | IR | ----- | ----- | 5 | μA | VR=5V |
Note: 1. Tolerance of luminous intensity is ±10%
2.Tolerance of forward voltage is ±0.05V
1000 pcs SMD 5050 LEDs/Reel
Application：
(1) LED Strip
(2) LED Moudle
(3) LED Tube
(4) LED Bulb Light
(5) LED Panel Light
(6) LED Landscape Lighting
SMD Usage Considerations:
1, SMD LED should be sealed in a dry environment, prevent LED from moisture absorption
2, To ensure sealing bag securely sealed before use
(Such as sealing bag breakage, leakage, should be required to repay the company again dehumidification, repackaging)
3, Opened the sealed bag, LED should be finished using within 12 hours(welding is complete)
4, It is recommended that customer: opened the sealed bag, with dial directly into the oven, temperature is 70 degrees, bake for more than 12 hours, and then take out welding.
5, SMD3528, 5050 welding recommends customers to use reflow (not recommended soldering iron welding, soldering iron temperature in excess of 300 degrees)
6, Reflow temperatures adopt 220-230° welded, as the most suitable (generally require 5050 reflow soldering temperatures below 3528, 5050 welding temperature with General recommendation 220 ± 5 degrees.
